Finally got the engine installed. It's a 1971 402 Big block. Mild Crane hyd. street cam. Edelbrock Performer intake with Holley 650. Sanderson block hugger headers. Single serpentine belt system.

Moroso pan for 55's with engine forward.

Passenger side header clearance.

Close

Really tight on drivers side. Had to grind some on the steering box and dimple the #5 tube.

Showing how tight they hug the block.

Got everything but a fuel pump and water pump installed.

Serpentine belt system is really close to radiator support. Will have to put radiator in 6cyl. position.

Drivers side is extremely tight fit for everything.

Getting close to finishing everyday.

A/C installed. I used the Vintage Air system under the dash, with a Sanden comp.